Drop Style Handlebar Classic road shape, in 6061 aluminum, 26.0mm diameter center section. Available in 40, 42 or 44cm width, measured from bar end to bar end, center to center.
Handlebar sizing: Generally the width of the bar should allow your arms to be parallel when your hands are in the outermost position on the bar. Narrower bars allow more maneuverability in tight spaces, wider bars allow the chest to open up more for better breathing.
Handlebars and Brake Levers
Bullhorn Style Handlebar A popular shape, especially for fixed/single speeds, in 6061 aluminum, 26.0mm diameter center section. Available in 42cm width, measured from bar end to bar end, center to center.
Combine with the top mount or bar end mount brake levers (see below) for an elegant cockpit option. The reach on the bullhorn is similar to the standard drop bar, so stem extension should be the same for either type.
Brake Levers The standard brake lever set for the drop bars is the ergonomic type. However, with the Bullhorn style bar you should use either the Top Mount (on the left, below) or Bar End Mount brake levers (on the right, below), depending on your preference.